use a straight thru cable...Depends on the sup eng. as to what cable you
use.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Anand Ghody
Sent: Monday, August 20, 2001 8:27 AM
To: [EMAIL PROTECTED]
Subject: help, catalyst 5500 console connectivity. [7:16523]
I just bought a catalyst 5505 from ebay and I am having trouble with the
console port. I am using one of the console cables that I use with some
other cisco routers. My hyperterminal terminal setting are
9600-8-none-1, no flow control. the switch when booted goes through its
diagnostics and boots fine. everything looks good except I can not
connect to it to configure it. Do the cataylst use a pinout different
than that of a router. Any one got any ideas?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17086&t=16523
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
