At 10:44 AM 8/24/01 -0400, Patrick Ramsey wrote:
>minicom
>
>It's probably already on your system. start it up and gointo settings and
>take out all the dial and hangup commands.
>
>-Patrick
>
> >>> "george gittins" 08/24/01 10:01AM >>>
>is there a hyperterminal version for linux?
For those who may not have installed it, you can almost always depend on
"cu".
cu -l /dev/cuaa0 -s 9600
This will console into your serial device on COM1. To exit, type in "~"
wait "." then hit enter.
The /dev/ might be different for Linux. You would have to know the same
information for minicom anyway (IIRC). Very light and most likely in the
most bare of systems as well. (like vi).
-Carroll Kong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17145&t=17115
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
