It has been a while since I have touched a 1900 but I am pretty sure that
the 1900 uses IOS so you would not be able to learn the Catalyst set/clear
command structure on this switch.
Heather
> -----Original Message-----
> From: Don Claybrook [SMTP:[EMAIL PROTECTED]]
> Sent: Friday, August 24, 2001 1:44 PM
> To: [EMAIL PROTECTED]
> Subject: 1900 CLI Same as Cat5K? [7:17177]
>
> Hello, all.
>
> I hope I'm not being redundant redundant, but I can't locate this in the
> archives, so here goes:
>
> I haven't had the occasion to do much with either the Catalyst 5000 or the
> 1900 series, I've only worked with 2912/24. For purposes of studying for
> an
> eventual CCIE lab, are the 'set' and 'clear' commands pretty much the same
> for
> both series? To get right to the point, can I purchase the cheaper 1900
> series and essentially learn the CLI structure of the Catalyst 5000 in
> this
> manner?
>
> Thanks,
> Don
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17180&t=17177
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
