hi ,
hi i have made a access list to restrict telnet on my router from other
network but when i implemented on vty it was no working .Pls help
the acesslist wass
access-list 55 permit 202.157.78.0 0.0.0.128
line vty 0 4
access-class 55 in
i just want that my 202.157.78.0 to 128 should be able to telnet my router
none other than it will be allowed telnet my router
thanx
kaushalender
----- Original Message -----
From: "Haydn Solomon"
To: ; ; "'kaushalenders'"
Sent: Friday, August 24, 2001 10:16 PM
Subject: RE: access-list [7:17097]
> Yes I do agree that 0.0.0.128 can be a wildcard mask but that would only
> "wildcard" one bit. That 128 would only cover the uppermost bit. But I
> agree if we know what range of ips need access then we can help this guy
> out.
>
> -Haydn
>
> -----Original Message-----
> From: Leigh Anne Chisholm [mailto:[EMAIL PROTECTED]]
> Sent: Friday, August 24, 2001 12:24 PM
> To: Haydn Solomon; [EMAIL PROTECTED]; kaushalenders
> Subject: RE: access-list [7:17097]
>
> 0.0.0.128 IS a wildcard mask. It just allows half of the IP addresses
> you
> allow using the mask you provided.
>
> The order of commands isn't important.
>
> Kaushalenders, perhaps you could indicate which address range you are
> trying
> to permit to have access, and which you are trying to deny access? That
> would help isolate the problem.
>
>
> -- Leigh Anne
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Haydn Solomon
> Sent: Friday, August 24, 2001 7:47 AM
> To: [EMAIL PROTECTED]
> Subject: Re: access-list [7:17097]
>
>
> Remember that masks on standard access-lists are
> wildcard reverse masks. try using a mask of 255 like
> this
>
> access-list 55 permit 202.157.78.0 0.0.0.255
> line vty 0 4
> access-class 55 in
>
> I don't think the problem is the order of commands.
>
>
> --- Midnight Man wrote:
> > You should change the order of your commands
> > Line vty 0 4
> > access-class 55 in
> > access-list 55 permit 202.157.78.0 0.0.0.128
> >
> > For sure it will run correctly
> > gook luck
> > MNM
> > --- kaushalenders wrote:
> > > hi ,
> > > hi i have made a access list to restrict telnet on
> > > my router from other
> > > network but when i implemented on vty it was no
> > > working .Pls help
> > > the acesslist wass
> > > access-list 55 permit 202.157.78.0 0.0.0.128
> > > line vty 0 4
> > > access-class 55 in
> > >
> > > but it restricted the whole network
> > [EMAIL PROTECTED]
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Make international calls for as low as $.04/minute
> > with Yahoo! Messenger
> > http://phonecard.yahoo.com/
> [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17292&t=17097
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
