At 06:26 PM 8/26/01, Brad Ellis wrote: >Sami, > >You'll need to give more info than that. The router does not care if the >packets are originated from a host or another router. It will filter >packets based on packet information, ie, source address, destination >address, port #... This filtering happens as part of the packet-forwarding process. Packets sent by the router (such as pings) may not go through this process. Sorry that I don't have the details, but I have run into surprising results in a lab environment when testing access lists from a router. You need to test them from end hosts. I can't believe I'm challenging a CCIE, ;-) but I was afraid nobody else would, and I think the question bears more research. Priscilla >Are you saying the router wont filter packets originated from the router >itself? How are your access-lists applied? Inbound or Outbound? What are >you trying to filter? Explain your situation a little better, and include >your access-list if you so desire. > >-Brad Ellis >CCIE#5796 >[EMAIL PROTECTED] >used Cisco: www.optsys.net > >""sami natour"" wrote in message >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi All , > > When I made standard access list I discoverd that it > > prevented packets originated form PC's and host but > > not packets originated from other routers.Any idea why > > this will happen. > > > > Best Regards , > > sami , > > > > > > __________________________________________________ > > Do You Yahoo!? > > Make international calls for as low as $.04/minute with Yahoo! Messenger > > http://phonecard.yahoo.com/ ________________________ Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=17341&t=17341 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
