I have bought ones at Home Depot or Ace Hardware (can't remember which). I
think they were like #6x3/8". Take one up there and let your fingers do the
walking (that's what I had to do). They weren't an exact match (the ends
were pointy, not flat, for one), but they fit and held. I think they were
sheetmetal screws.
Mark
-----Original Message-----
From: Bob Johnson [SMTP:[EMAIL PROTECTED]]
Sent: Monday, August 27, 2001 7:04 PM
To: [EMAIL PROTECTED]
Subject: 2500/2600 rack bracket screws??? [7:17461]
Does anyone have a source for the little screws you need to mount the rack
ears onto 2500/2600 series chassis?
I always seem to lose a few here and there......
Bob Johnson
[EMAIL PROTECTED]
Engineering
Stox Broadcast Corporation
The Landing, 300-375 Water St.
Vancouver, BC V6B 5C6
Tel. 604-633-2900
Fax. 604-685-3170
www.stox.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17472&t=17461
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]