Use a Type 1 cable. It has a male DB-9 connector that connects to the router on one side, and an IBM Data Connector that plugs into the MAU on the other. ----- Original Message ----- From: "Omer Ehsan Dar" To: Sent: Tuesday, August 28, 2001 9:38 PM Subject: how to connect to token interface on router with IBM 8228 MAU [7:17621] > Hi all, > If any can help me out I would be grateful > Thanks in advance > Omer Dar _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=17640&t=17640 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]