Yes, I was correct. have a look
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(1), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Fri 27-Apr-01 14:13 by cmong
Image text-base: 0x0305F5F8, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE
SOFTW
ARE (fc1)
2503 uptime is 13 minutes
System returned to ROM by power-on
System image file is "flash:c2500-is-l.122-1.bin"
cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of memory.
Processor board ID 04141043, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory
16384K bytes of processor board System flash (Read ONLY)
Symon
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Symon Thurlow
Sent: 29 August 2001 08:13
To: [EMAIL PROTECTED]
Subject: Re: 2501 Acces Pro [7:17414]
hmmm, I have a converted Ciscopro 2503, 16/16 and I am pretty sure I
put 12.2 on it. I'll have a look tonight when I get home.
Symon
-------------------
> At 01:22 PM 8/27/01 -0400, you wrote:
> >Has anyone had any experience with these? I just was given two of
them for
> >free and want to upgrade them to new code. When I try to upgrade
them, I get
> >a message that says wrong software for this platform. I'm not sure
if it is
> >because the boot rom is too old, or if it is something else. If I
put in new
> >2500 boot rom and upgrade the memory, will these run the new code?
>
>
> Which version of "new code" are you attempting to run?
>
> If you're thinking 12.1 or 12.2 code, forget it!
>
> I'm currently running 12.0-18 code on one now....and I haven't had
> any luck going any higher than that!
>
> And I have the latest bootroms with 16D/16F installed.
>
> Stefan
[EMAIL PROTECTED]
>
Cheers,
Symon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17762&t=17414
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
