I'll bite: PROS: 1) If DSL user decides to change his network for some reason and it overlaps another on somewhere, dynamic routing will hose the core. (could prevent with route filtering but that would be an even bigger hassle). 2) 7206 might fold with that many routing protocol neigbors (depends on routing protocol) 3) Job security for the guy managing the network :) 4) ODR needs CDP and that many neighbors could fold the core too maybe ?? Don't know about that. 5) Less overhead in general. 6) Security, Don't want some guy to announce a boatload of bogus networks. 7) Unless the routing protocol of choice can only send a default route, Those little DSL routers would get killed with a big table. OSPF is would do it but would each little router would need to be in it's own area or the LS database would kill the little guys . RIP seems like a good choice, but again, there would be need for a lot of filtering to keep the table small. You could have a default static on all the little guys and filter ALL updates coming out of the core. But there is the security thing again. 8) Stability, The static way will be the most stable for sure, CONS: 1) Managment nightmare. I think I see their point already Chuck. I don't quite see why CDP wouldn't be allowed though. Am I close ? Tony M. ----- Original Message ----- From: "Chuck Larrieu" To: Sent: Wednesday, August 29, 2001 11:28 PM Subject: I have a customer who... food for thought - static routes [7:17819] > I have a customer who... don't you love it when a post begins with those > words? > > In my case, I am hoping this can serve as food for thought, a springboard > for discussion. So here goes.... > > My customer is a high tech firm whose name you would all recognize, if I > were to exhibit ill manners by revealing it. > > My project ( well, I'm just the junior assistant engineer ) is to develop > and proof configurations for a private remote access network. DSL at the > home, ATM at the central site. Not a VPN. This circuit does not touch the > internet. > > In any case, the client is expecting 500-1000 home users on this network. > > Here's the kicker. the client refuses to allow routing protocols on either > the home user routers ( Cisco 827's ) or the central site router ( Cisco > 7206 ) That means how many static routes at the host site? :-0 > > Food for thought - what are some of the reasons the customer might not want > a routing protocol of any kind on this network? When discussing with the > customer engineer in charge of this project, I was given a couple of > reasons, and upon hearing them I saw the point and agreed the concerns were > valid. > > BTW, the point was not that the customer hates me and wants me to spend the > next three weeks typing in static routes. Nor is it that the customer does > not "get it". It is not a matter of good or bad design. > > So, in light of the old saw that static routes are not scalable, and should > be avoided, what might be some reasons that a designer would demand a > network of this size and relative complexity, with users being added, > subtracted, and relocated, thus creating long term employment for the router > administrator, be composed entirely of static routes? What are the plusses? > What is the downside? > > Your analyses, please. > > Chuck > > P.S. I think I'm going to try again. Maybe On Demand Routing would solve my > problem and the customer's. Oops, that's right. The major component of ODR > is not allowed on this network either. ( hint ) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=17826&t=17826 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
