Hello colleagues, I am trying to install a redundant SE III in a Cat5509 switch; the module is booting, but then the system is halted. Here is the output from the boot sequence: System Bootstrap, Version 5.1(2) Copyright (c) 1994-1999 by cisco Systems, Inc. Presto processor with 65536 Kbytes of main memory Autoboot executing command: "boot bootflash:RTSYNC_cat5000-sup3_4-5-3.bin" Loading Network Management Processor image Uncompressing file: ########################################################### ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ############################################################## System Power On Diagnostics NVRAM Size ...................512 KB ID Prom Test ..................Passed DPRAM Size ....................16KB DPRAM Data 0x55 Test ..........Passed DPRAM Data 0xaa Test ..........Passed DPRAM Address Test ............Passed Clearing DPRAM ................Done System DRAM Memory Size .......64MB DRAM Data 0x55 Test ...........Passed DRAM Data 0xaa Test ...........Passed DRAM Address Test ............Passed Clearing DRAM .................Done EARLII ........................Present EARLII RAM Test ...............Passed EARL Serial Prom Test .........Passed Level2 Cache ..................Present Level2 Cache test..............Passed Boot image: bootflash:RTSYNC_cat5000-sup3_4-5-3.bin Downloading epld sram device please wait ... Programming successful for Altera 10K50 SRAM EPLD SYSTEM_FATAL_ERROR: Banff subsystem failed SYSTEM_FATAL_ERROR: Unsupported Earl ASIC Halting the system. Does this mean that one of the ASICs on the card is malfunctioning ? Thanks for your help in advance. Hans _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18048&t=18048 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]