Hey Tony...
Sorry its not working????Any other way to get this work?
Router(config-subif)#encapsulation dot1Q 1 Native
^
% Invalid input detected at '^' marker.
Router(config-subif)#enca
Router(config-subif)#encapsulation dot
Router(config-subif)#encapsulation dot1Q 1 ?
Router(config-subif)#encapsulation dot1Q 1
>From: "Tony Medeiros"
>Reply-To: "Tony Medeiros"
>To: [EMAIL PROTECTED]
>Subject: Re: Working ISL/DOT1Q config [7:18070]
>Date: Fri, 31 Aug 2001 10:12:12 -0400
>
>Put the word "Native" after the "encapulation dot1q 1" on interface
>fast0\0.1 In the dot1q world, the native vlan for the port,(vlan 1) is
>not tagged or encapsulated in the dot1q frame. Hence the need for the
>command. Your native vlan for the trunk port (2/34) is vlan 1 accourding
>to
>your config cus you didn't assign it to anything else.
>
>Doing some big time switch study lately aren't you ? :)
>Take care
>Tony M.
>#6172
>
>
>----- Original Message -----
>From: "Cisco Lover"
>To:
>Sent: Friday, August 31, 2001 5:43 AM
>Subject: Working ISL/DOT1Q config [7:18070]
>
>
> > Hi friends..
> >
> > Can any one send me any working configuration for trunking using cat5
>for
> > intervlan routing..
> >
> > I have followed all the instructions in books and everwhere but still
>cant
> > get it work..Donot know where I m wrong.(Config atttached)
> >
> > Thanks for the help..
> >
> > Cisco Lover
> >
> >
> > FE router:
> >
> >
> > interface FastEthernet0/0
> > no ip address
> > no ip directed-broadcast
> > speed 100
> > full-duplex
> > !
> > interface FastEthernet0/0.1
> > encapsulation dot1Q 1
> > ip address 190.100.1.10 255.255.255.0
> > no ip directed-broadcast
> > !
> > interface FastEthernet0/0.2
> > encapsulation dot1Q 2
> > ip address 190.100.2.10 255.255.255.0
> > no ip directed-broadcast
> >
> > Router1
> >
> > interface Ethernet0
> > ip address 190.100.1.1 255.255.255.0
> > no ip directed-broadcast
> >
> > router2
> > interface Ethernet0
> > ip address 190.100.2.1 255.255.255.0
> >
> > CAtalyst:
> > port32:Vlan1
> > port33:vlan2
> >
> > set interface sc0 1 190.100.1.20/255.255.255.0 190.100.1.255
> >
> > set interface sl0 down
> > set interface me1 down
> > set ip route 0.0.0.0/0.0.0.0 190.100.1.10
> > !
> > #syslog
> > set logging level cops 2 default
> > !
> > #set boot command
> > set boot config-register 0x2
> > set boot system flash bootflash:cat4000.5-5-1.bin
> > set boot system flash bootflash:cat5000-sup3.4-2-1.bin
> > set boot system flash bootflash:cat4000.5-4-2.bin
> > !
> > #module 1 : 2-port 1000BaseX Supervisor
> > !
> > #module 2 : 34-port 10/100/1000 Ethernet
> > set vlan 2 2/33
> > set port speed 2/34 100
> > set port duplex 2/34 full
> > clear trunk 2/34 3-1005
> > set trunk 2/34 nonegotiate dot1q 1-2
> >
> >
> >
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
>http://explorer.msn.com/intl.asp
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18094&t=18070
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
