Hi guys,
Trying to run ISL/DOt1Q trunking on my cat5,but getting this error.
Console> (enable) set trunk 3/1 on dot1q 1
Feature not supported on Module 3.
Is that due to IOS???if yes ,please advice required IOS for this module.
Thanks.
Console> (enable) sh ver
WS-C5505 Software, Version McpSW: 5.5(5) NmpSW: 5.5(5)
Copyright (c) 1995-2000 by Cisco Systems
NMP S/W compiled on Dec 14 2000, 17:42:24
MCP S/W compiled on Dec 14 2000, 17:37:38
System Bootstrap Version: 3.1.2
Hardware Version: 1.0 Model: WS-C5505 Serial #: 066546807
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
1 0 WS-X5530 012758150 Hw : 3.0
Fw : 3.1.2
Fw1: 4.2(1)
Sw : 5.5(5)
WS-F5521 011477888 Hw : 1.1
3 24 WS-X5224 011795763 Hw : 1.4
Fw : 3.1(1)
Sw : 5.5(5)
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 32640K 19331K 13309K 8192K 5575K 2617K 512K 170K 342K
Console> (enable) sh flash
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. ffffffff 89280598 4f19f0 22 4921710 Jul 09 2001 09:41:19
cat5000-sup3
.5-5-5.bin
2680336 bytes available (4921840 bytes used)
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18170&t=18170
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]