Use a CAT 5 straight cable, plug one end to the router`s RJ45 and the other end to the IBM MAU`s connector. This connector which I don`t know whats its name, you plug it to the IBM 8228 and its has a RJ45 at the other end. Someone point me out to use IBM 8228 as Token Ring switch a while before, you may try to dig this list archive, use Token Ring as a keyword at the search engine. Good luck >Subject: how to connect to token interface on router with IBM 8228 MAU [7:17621] > Hi all, > If any can help me out I would be grateful > Thanks in advance > Omer Dar Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18220&t=18220 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]