What kind of router ??? The IP/FW was only designed for the 1600, 1700's, &
2500's. Regular IP will allow you to configure PAT (NAT overload), but the
true FW IOS is for the smaller routers.
All the best !!!
Phil
----- Original Message -----
From: "Nick Osborne"
To:
Sent: Monday, September 03, 2001 10:35 AM
Subject: RE: how to make a router firewall? [7:18268]
> Hello Jim,
> You can start by configuring access lists & running NAT/PAT with you
> existing IOS, or go all the way & run an IOS with the Firewall Feature set
> such as 12.1.5-YB4 . Just depends on the
> depths you want to go to.
> The following link is a simple intro to NAT if you never used it before
> http://www.cisco.com/warp/public/556/nat-cisco.shtml
> Hope this helps
> Nick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18314&t=18268
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
