You might want to research the 1700 DSL routers with VPN & Firewall IOS too.
The problem you may be dealing with is a proprietary DSL setup. A few years
back when I worked for Covad, it was the DSLAM technology that dictated the
type of CPE we could use & since Cisco sold DSLAM's... their CPE's almost
never worked unless you were a Rhythms customer. The only somewhat
universal standard between the CLEC's (that I have seen), is the IDSL (128
ISDN bonded).
Secondly- your customer may need to upgrade their service to non-PPOE or
PPOA service. Unfortunately- you would have the ISP & CLEC to research for
more on this. I can say even in the TAC & NOC we weren't provided this
knowledge, so you may want to look for a liaison or service engineer that
works as a go between with the ISP (but is employed by the CLEC).
As with the PIX, I'm pretty sure I have no available setting in my 506,
using 6.0 code, for changing any of the Ethernet standards.
Hope to have helped
Phil
----- Original Message -----
From: "Jim Bond"
To:
Sent: Monday, September 03, 2001 12:52 PM
Subject: PPPoE with PIX? [7:18323]
> Hello,
>
> My client is currently using Linksys router (2
> ethernet ports) connect to ISP DSL modem. The Linksys
> was configured to use PPPoE. I'm trying to replace the
> Linksys with a PIX 506 or 1720 router, Is there a way
> to configure PPPoE on them?
>
> Thanks in advance.
>
> Jim
>
> __________________________________________________
> Do You Yahoo!?
> Get email alerts & NEW webcam video instant messaging with Yahoo!
Messenger
> http://im.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18331&t=18323
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
