check you rip, is there a command passive-interface is
used?[EMAIL PROTECTED] wrote:
>
> I have 2 2501 routers setup as follows:
>
> RouterA eth0 with 192.168.254.1/24
> RouterA serial 0 with 192.168.100/24
> setup as DTE, no shutdown, router rip
> network 192.168.0.0
>
> RouterB eth0 with 192.168.50.1/24
> RouterB serial 0 with 192.168.100.11/24
> setup as DCE, clock rate 64000, no shutdown, router rip
> network 192.168.0.0
>
> My problem is it won't see any of the networks...do I have this
> number setup
> wrong? when I setup a static IP ROUTE..the networks work fine
> and see each
> other its just with RIP for some reason is unable to see the
> other
> networks...what am I doing wrong?
>
> thank you all
>
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18654&t=18572
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
