----- Original Message -----
From: "David Goddard"
To:
Sent: Friday, September 07, 2001 6:06 PM
Subject: RE: OSPF authentication question. [7:18813]
> rajesh,
>
> I just experienced the same problem in a lab this week. If you establish
> OSPF neighbors ok w/out authentication, and your debug shows that you are
> failing on mismatch authentication, try redoing your command by removing
it
> and reentering it... I don't know why this worked for me, and I KNOW I
> didn't misstype or mispell the word I used for authentication (cisco). I
> deleted the entry, and reentered, and viola! The only other thing you
could
> try is to reload the affected router... I have seen some quirky things
> lately that seem to clear with a reload. Bill Gates would be so proud.
>
> hth,
> Dave
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18966&t=18813
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
