I had MediaVision (now ATT Broadband) so I think I was a RR customer too. I
had a similar setup(2611) and a similar problem, I found out that they lock
down your MAC address somehow in their DHCP database. So I spoofed my
"outside" mac address on my router. As you can see I also was providing Nat
translation for my home network. This worked great, I dumped it however in
favor of DSL and some static addresses.

What I find odd about your debug output is that the so called bridge is
using a RFC1918 private address, this would make me think that it may not be
a bridge?? You may want to take a sniffer trace of the interaction between
your Win98 box and the Bridge as it aquires its address. Ethereal is free if
you don't have one.

My old home config:

interface Ethernet0/1
 description connected to Internet
 mac-address 0060.9720.5855
 ip address dhcp
 ip nat outside
 half-duplex
 no cdp enable

Hope this helps!

Cassidy D. Smith




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19071&t=18901
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to