I did a lot of research on that topic last year when I developed Sybex's
CCNA Virtual Test Center. The following is an excerpt from that product:
Split horizon can be disabled on a Frame Relay interface for some protocols,
such as TCP/IP, but it cannot be disabled for protocols such as IPX (except
when using EIGRP) and AppleTalk.
-- Leigh Anne
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Phantom
> Sent: Monday, September 10, 2001 12:45 AM
> To: [EMAIL PROTECTED]
> Subject: Question about split horizon & IPX [7:19232]
>
>
> Hi
>
> I am studying for CCIE Written, one of my books say that you can't disable
> split horizon for IPX the other says you can. Which one of these
> are correct
> and for which routing protocols can I do it.
>
> Thanks for the help
>
> Pieter Jordaan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19277&t=19232
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
