My point is that is you are trying to route and bridge the same protocol in a
single router the example below will not work, any protocols not routed
would be
bridge between e1 and s1.
Dave
Darren Crawford wrote:
> My client has a configuration as shown below running over a 56K circuit for
> IP traffic and some terminal access to a mainframe not yet upgraded for
TN3270.
>
> HTH
>
> D.
>
> At 05:46 PM 9/11/2001 -0400, MADMAN wrote:
> >ME thinks Russ wants to bridge and route the same protocol in which
> >case that won't work. Check IRB, integrated routing and bridging. I
> >have used IRB to bridge IP/IPX from one interface to another in the same
> >router but never in the scenerio you describe.
> >
> > Dave
> >
> >Jim Brown wrote:
> >>
> >> int e0
> >> ip address X.X.X.X Y.Y.Y.Y
> >>
> >> int e1
> >> bridge-group 1
> >>
> >> int s0
> >> ip address X.X.X.X Y.Y.Y.Y
> >>
> >> int s1
> >> bridge-group 1
> >>
> >> bridge 1 protocol ieee (or dec)
> >>
> >> -----Original Message-----
> >> From: Russ Kreigh [mailto:[EMAIL PROTECTED]]
> >> Sent: Tuesday, September 11, 2001 2:24 PM
> >> To: [EMAIL PROTECTED]
> >> Subject: Routing and Bridging [7:19472]
> >>
> >> Hello all -
> >>
> >> I need to bridge E1 to S1 on a router, and route E0 to S0, how can I do
> >> this? This router config is the same on each end.
> >>
> >> END A END B
> >>
> >> E0-S0 -- S0-E0
> >> E1-S1 -- S1-E1 (Bridge)
> >>
> >> Thanks
> >>
> >> -Russ
> >--
> >David Madland
> >Sr. Network Engineer
> >CCIE# 2016
> >Qwest Communications Int. Inc.
> >[EMAIL PROTECTED]
> >612-664-3367
> >
> >"Emotion should reflect reason not guide it"
> x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x$:0`0:$x,,,,x$:0`0:$x,,,,x
>
> Darren S. Crawford
> Network Systems Consultant
> Lucent Technologies - Sacramento
>
> email: [EMAIL PROTECTED]
> page via email: [EMAIL PROTECTED]
> pager: 800-467-1467
>
> "You always have time for things you put first" - Tucker Resources
>
> x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x$:0`0:$x,,,,x$:0`0:$x,,,,x
--
David Madland
CCIE# 2016
Senior Network Engineer
Qwest Communications
612-664-3367
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19525&t=19472
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
