If you can I have not heard of it but can't possibly keep up with
everything:) I have both routers and if I have time I'll check it out...
Dave
Chuck Larrieu wrote:
> I don't want to do much of anything except make sure my customers are
> served, and then collect a paycheck as my reward. :->
>
> What I stated is that ISL/802.1q trunking can, according to one of my pals,
> be done on 10baseT ports ( e.g. a 2501 ) when you have 12.2 code on the
box.
> I don't see this verified yet in the IOS feature navigator, but my pal is
> prepping for his Lab date in November, and has a nice setup at home. I
spoke
> with him last night by telephone ( he's in NY City, and I was checking up )
>
> I hope I was clarifying the use and availability of ethernet subinterfaces
> in my response.
>
> anyone got 12.2 code on a 2501 or a 2610 with 10baseT and can verify this?
>
> Chuck
>
> -----Original Message-----
> From: MADMAN [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 12, 2001 2:41 PM
> To: Chuck Larrieu
> Cc: [EMAIL PROTECTED]
> Subject: Re: sub-interface on Ethernet or FastEthernet [7:19394]
>
> Don't follow you here, Do you want to trunk ( which requires
> subinterfaces and is only available on 100M interface) or simply
> subinterface to, say, create mulitple IPX networks? The later you could
> do for quite some time and I think your correct in that you cannot
> subinterface ethernet with IP addresses but IPX will work.
>
> Chuck Larrieu wrote:
> >
> > this is apparently an IOS limitation. A pal of mine was telling me that
> > commencing with IOS 12.2 that trunking and subinterfaces are permitted on
> > regular old ethernet 10baseT interfaces. This is certainly not true on
> 12.1
> >
> > well, clarification - subinterfaces are permitted for IPX routing, but
not
> > for IP routing. IP requires ISL or 802.1q trunking. this apparently
> changes
> > with IOS 12.2
> >
> > help?
> >
> > chuck
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Jeff Smith
> > Sent: Wednesday, September 12, 2001 9:03 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: sub-interface on Ethernet or FastEthernet [7:19394]
> >
> > Jimmy,
> > I don't see why it would not work on an Ethernet interface when it does
on
> > FastEthernet, but I don't have one to test on right now. Give it a shot,
> it
> > should work.
> >
> > Jeff
> >
> > >From: "Jimmy Leong"
> > >Reply-To: "Jimmy Leong"
> > >To: [EMAIL PROTECTED]
> > >Subject: Re: sub-interface on Ethernet or FastEthernet [7:19394]
> > >Date: Tue, 11 Sep 2001 22:18:43 -0400
> > >
> > >Hi Jeff :
> > >
> > > Currently I am using cisco 4000 with 2 ethernet port ( 10Base T )
,
> > >interface Ethernet 1 got 3 networks ( 2 secondary IP ) , Interface
> Ethernet
> > >0 got 1 network. I plan to use sub-interface in interface Ethernet 1
> > >instaed
> > >of secondary IP. Interface Ethenet is connected to hub.
> > >
> > >Some people told me that we can only create sub-interface on
FastEthernet
> > >and NOT Ethernet ( 10Base ). Is it true ? What is the minimum IOS
version
> > >should I use ?
> > >
> > >
> > >cheers
> > >Jimmy
> > >
> > >
> > >
> > > >From: "Jeff Smith"
> > > >To: [EMAIL PROTECTED], [EMAIL PROTECTED]
> > > >Subject: Re: sub-interface on Ethernet or FastEthernet [7:19394]
> > > >Date: Tue, 11 Sep 2001 12:46:02 +0000
> > > >
> > > >Certainly can. Used often when routing between vlans when the router
> is
> > > >external to the switch (non- rsm, msfc, etc)- the old "router on a
> stick"
> > > >scenario.
> > > >
> > > >>From: "Jimmy Leong"
> > > >>Reply-To: "Jimmy Leong"
> > > >>To: [EMAIL PROTECTED]
> > > >>Subject: sub-interface on Ethernet or FastEthernet [7:19394]
> > > >>Date: Tue, 11 Sep 2001 06:47:35 -0400
> > > >>
> > > >>Hi all :
> > > >>
> > > >> Can anyone enlighten me whether I can create sub-interface on
> > > >>Ethernet
> > > >>or FastEthernet.
> > > >>
> > > >>thanks in advance
> > > >>
> > > >>regards
> > > >>Jimmy
> > > >>
> > > >>
> > > >>_________________________________________________________________
> > > >>Get your FREE download of MSN Explorer at
> > >http://explorer.msn.com/intl.asp
> > >_________________________________________________________________
> > >Get your FREE download of MSN Explorer at
> http://explorer.msn.com/intl.asp
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp
> --
> David Madland
> Sr. Network Engineer
> CCIE# 2016
> Qwest Communications Int. Inc.
> [EMAIL PROTECTED]
> 612-664-3367
>
> "Emotion should reflect reason not guide it"
--
David Madland
CCIE# 2016
Senior Network Engineer
Qwest Communications
612-664-3367
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19711&t=19394
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
