Yeah its' there....I thought I was seeing things the first time I noticed it
so I issued another restart...sure enough...right there in the POST test ;)

----- Original Message -----
From: "Patrick Ramsey" 
To: ; 
Sent: Friday, September 14, 2001 10:53 AM
Subject: Re: Information on building a Pix out of a PC [7:19775]


> REALLY?  Makes you wonder why they would ever have mouse drivers embedded
in their code!  We use 525's here and I see nothing of the sort.
>
> Maybe they use VI to edit their code in and they just wanted cut and paste
support!  : )
>
> >>> "Allen May"  09/14/01 11:16AM >>>
> And for one we could see a PIX 515 boot up without the "mouse not
> initialized" message ;)  I could finally plug one in to make it
> happy...rofl.
>
> ----- Original Message -----
> From: "Patrick Ramsey" 
> To: 
> Sent: Friday, September 14, 2001 9:49 AM
> Subject: Re: Information on building a Pix out of a PC [7:19775]
>
>
> > Well of course the os is proprietery....It's cisco's ....
> >
> > But it runs on intel architecture, boots from compatible flash, and uses
> > standard nics....hence the abillity to run the os from a "pc"  Even
though
> > this pc would have to have the nics that the os supports as well as the
> > flash, it should still be possible.
> >
> > -Patrick
> >
> > >>> "[EMAIL PROTECTED]"  09/14/01 12:51AM >>>
> > Unless things have changed in the past year or so, you cannot build a
Pix
> on
> > a PC.  The PIX has a proprietary OS, which is specifically touted as NOT
> > being portable to a PC platform.  Since the OS is proprietary, it is
> > considered less subject to attack than those sitting on known and
> vulnerable
> > (MS & unix) operating systems.
> >
> > Hope this helps
> >
> > Joe
> > In a message dated 9/13/01 10:54:23 AM, [EMAIL PROTECTED] writes:
> >
> >  > a PC....!
> >
> > Tmuzaina




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19968&t=19775
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to