CSU on one side need to clock from the network, the other internal,
one serial interface needs to provide clock, if you have access to Cisco
here you go:
http://www.cisco.com/warp/public/116/t1_back_to_back.html
Dave
Hoa Ngo wrote:
>
> Hi! Everyone,
> I have 2 2611 with WIC-1DSU-T1 on each. I made the T1 back to back cable. I
> have trouble to bring up the serial interface. Can someone give me
> instruction or send me the config? Many thanks.
> Howard
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367
"Emotion should reflect reason not guide it"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20010&t=19992
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
