Agreed (I think). Remove the 2nd flash and post a show ver.
----- Original Message -----
From: "MADMAN"
To:
Sent: Saturday, September 15, 2001 7:24 PM
Subject: Re: Install 2 8MB flash on Cisco 2502 [7:20043]
> It's most likely you have old boot roms that are not able to recognize the
> 16M of
> memory.
>
> Dave
>
> "Albert Y. Pak" wrote:
>
> > Hi All,
> > I am able to boot Cisco 2502 with 1 x 8MB flash. However, as soon as I
> > install a second 8MB flash (empty), the router hangs at System Bootstrap
> > (Version 11.0(10c)XB1). + doesn't work either. These 2 8MB flash
> > are identical.
> > Please advise,
> > Albert
> --
> David Madland
> CCIE# 2016
> Senior Network Engineer
> Qwest Communications
> 612-664-3367
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20102&t=20043
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
