Hi Gil,
I guest this is a third party pcmcia flash and it's screwed already.
I've had this problem before, get a replacement and you'll be fine.
anyong
""Gil Shulman"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I am having some trouble with the installation of a new flash card.
> For some reason it marks the flash as "Device not programmable", the write
> protected switch is o.k.
> I tried to repartition the flash with no luck.
> I am adding information from the Router, this is the third flash that I am
> replacing ( Is it possible that bootstrap version is not up to date enough
?
> ).
>
> Cisco Internetwork Operating System Software
> IOS (tm) 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY
DEPLOYMENT
> RELEASE SOFTWARE (fc1)
> Copyright (c) 1986-1997 by cisco Systems, Inc.
> Compiled Tue 18-Mar-97 14:01 by ccai
> Image text-base: 0x04018060, data-base: 0x02005000
>
> ROM: System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
SOFTWARE
> (fc1)
>
> Router uptime is 2 minutes
> System restarted by power-on
> System image file is "eprom:c1600-boot-r.111-10.AA", booted via ROM
>
> cisco 1601 (68360) processor (revision C) with 3584K/512K bytes of memory.
> Processor board ID 06037967
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> 1 Ethernet/IEEE 802.3 interface.
> 1 Serial(sync/async) network interface.
> System/IO memory with parity enabled (On Board Memory disabled)
> 8K bytes of non-volatile configuration memory.
> 8192K bytes of PCMCIA flash (Device not programmable)
>
> Configuration register is 0x2102
>
>
>
>
> PCMCIA flash directory:
> No files in PCMCIA flash
> [0 bytes used, 8388608 available, 8388608 total]
> 8192K bytes of PCMCIA flash (Device not programmable)
>
> Chip Bank Code Size Name
> 1 1 4096KB Unknown Chip
> 2 1 4096KB Unknown Chip
>
> Help will be appreciated.
>
> Gil
>
>
>
****************************************************************************
**********************
> The contents of this email and any attachments are confidential.
> It is intended for the named recipient(s) only.
> If you have received this email in error please notify the system manager
> or the
> sender immediately and do not disclose the contents to any one or make
> copies.
>
> ** eSafe scanned this email for viruses, vandals and malicious content **
>
****************************************************************************
**********************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20119&t=20113
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
