I worked once for a company that had separate files for each device, that
really seems the most sensible to me.
Brian
----- Original Message -----
From: "Frank Ofus"
To:
Sent: Tuesday, September 18, 2001 1:52 PM
Subject: Re: Syslogd question [7:20315]
> Patrick,
> Thanks for the response. I'm running unix tftpd. I
> can't seem to find the syntax to force my tftpd to
> prepend in the name for each log. Any advice?
>
> Thanks,
>
> -Frank
>
>
> --- Patrick Ramsey
> wrote:
> > This should be functionallity of the logging
> > server... It should do a reverse lookup on the ip
> > and post it there... If there is no reverse lookup,
> > it hsould at least post the ip address... what
> > syslog are you running and what platform?
> >
> > -Patrick
> >
> > >>> "Frank Ofus" 09/18/01
> > 04:34PM >>>
> > Hi folks,
> > I have many routers pointing to one syslogd server.
> > Is it possible to tell the Router to prepend the
> > router's name in each log message so when looking at
> > the logs, you can tell which message originates from
> > which router? The below log does not tell me the
> > name
> > of the router:
> >
> > R2501#show log
> > Syslog logging: enabled (0 messages dropped, 0
> > flushes, 0 overruns)
> > Console logging: level debugging, 436 messages
> > logged
> > Monitor logging: level debugging, 0 messages
> > logged
> > Trap logging: level informational, 440 message
> > lines logged
> > Logging to 192.168.1.1, 6 message lines
> > logged
> > Buffer logging: level debugging, 436 messages
> > logged
> >
> > Log Buffer (4096 bytes):
> > te to up
> > Jul 20 20:47:40.208 EDT: %FR-5-DLCICHANGE: Interface
> > Serial1 - DLCI 203 state changed to ACTIVE
> > Jul 30 20:28:47.094 EDT: %LINEPROTO-5-UPDOWN: Line
> > protocol on Interface Serial1, changed state to down
> > Jul 30 20:28:48.130 EDT: %LINEPROTO-5-UPDOWN: Line
> > protocol on Interface Serial1, changed state to up
> > Jul 31 12:41:22.688 EDT: %SYS-5-CONFIG_I: Configured
> > from console by dpendlet on vty0 (192.168.1.50)
> > Jul 31 12:44:56.400 EDT: %SYS-5-CONFIG_I: Configured
> > from console by dpendlet on vty0 (192.168.1.50)
> > Aug 2 14:03:15.847 EDT: %SYS-5-CONFIG_I: Configured
> > from console by lkim on vty0 (192.168.1.50)
> > Aug 4 21:38:48.371 EDT: %LINEPROTO-5-UPDOWN: Line
> > protocol on Interface Serial1, changed state to down
> >
> >
> >
> > I want the name of the router to be in each line of
> > the log. Thanks for any help.
> >
> >
> > -Frank
> >
> >
> >
> > __________________________________________________
> > Terrorist Attacks on U.S. - How can you help?
> > Donate cash, emergency relief information
> >
> http://dailynews.yahoo.com/fc/US/Emergency_Information/
> > [EMAIL PROTECTED]
> >
>
>
> __________________________________________________
> Terrorist Attacks on U.S. - How can you help?
> Donate cash, emergency relief information
> http://dailynews.yahoo.com/fc/US/Emergency_Information/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20328&t=20315
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
