Full
Dave
Tony van Ree wrote:
>
> Hi,
>
> In most cases a CIR of 128K in each direction (full duplex) with bursts up
> to 256K depending on frame switch and or other PVC's on the link's
utilsation.
>
> Just a thought
>
> Teunis
> Hobart, Tasmania
> Australia
>
> On Tuesday, September 18, 2001 at 05:52:57 PM, [EMAIL PROTECTED]
wrote:
>
> > We have a discrepancy going on between our infrastructure group. The
> question
> > is. Is Frame Relay full duplex or half? We've called several providers
> > several
> > times each and we get different answers from the same provider. We are
> fairly
> > certian that a T1 is full duplex -1.544 both in and out.
> >
> > If we have a frame circuit that has a port of 256 and a CIR of 128. Are
we
> > guaranteed 128 to transmit and 128 to receive, or are we guaranteed 128
to
> > both
> > transmit and receive.
> >
> > Curious and thanks!,
> > Rob Michel
> > [EMAIL PROTECTED]
> --
> www.tasmail.com
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367
"Emotion should reflect reason not guide it"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20335&t=20320
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
