that is right...I stand (or sit) corrected. commserver IOS allows more than
5 vty lines
-e-
----- Original Message -----
From: "Jason"
To:
Sent: Wednesday, September 19, 2001 8:49 PM
Subject: Re: Regarding 2509 telneting sessions... [7:20476]
> No, you can also use CommServer IOS and you can have as many lines as you
> want.. only problem is you cannot run the advance routing protocols...
>
> Jason
>
> ""EA Louie"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > ...and to add to Phil's already great description, you're limited to 5
> > telnet sessions into your 2509 unless Enterprise IOS is installed and
> you've
> > configured additional vty lines.
> >
> > ----- Original Message -----
> > From: "Circusnuts"
> > To:
> > Sent: Wednesday, September 19, 2001 7:45 PM
> > Subject: Re: Regarding 2509 telneting sessions... [7:20476]
> >
> >
> > > This is hard to answer. First- the whole reason for having the Access
> > > Server in your lab is to get over the idiosyncrasies of how to
configure
> > it
> > > & how to work it effectively. That's just one less item to worry
about
> > when
> > > heading to the lab. Most any Telnet program will open multiple
> sessions.
> > > The only way I can imagine this would be possible, with your setup, is
> to
> > > Telnet into your 2509 router multiple times. Telnet into say the
> Ethernet
> > &
> > > start a session with router "1." Telnet into the Ethernet again with,
> > > setting up a concurrent session with say router "2." Get the
picture...
> > Do
> > > remember- in the grand scheme of things that 2509's cnrtl, shft, 6, &
X
> is
> > > really going to make your life easier when using a good size rack of
> > > equipment :o)
> > >
> > > All the best !!!
> > > Phil
> > >
> > >
> > > ----- Original Message -----
> > > From:
> > > To:
> > > Sent: Wednesday, September 19, 2001 8:29 PM
> > > Subject: Regarding 2509 telneting sessions... [7:20476]
> > >
> > >
> > > > Hello all:
> > > >
> > > >
> > > > Is there a way that I can open multiple sessions in seperate
windows.
> > I'm
> > > > currently using Windows ME, I downloaded a program called
> > SecureCRT...its
> > > > like hyperterminal but Better....so what I would like to do is open
up
> > > each
> > > > telnet session in a seperate window... as I hate doing the
> > CTRL+SHFT+6+x
> > > > routine...
> > > > I would much prefer to have all the sessions open in seperate
> > > windows...can
> > > > this be done...if so how?
> > > >
> > > > P.S. I'm using a 2509 octal cable out to 8 routers.
> > > >
> > > > thank you
> > _________________________________________________________
> > Do You Yahoo!?
> > Get your free @yahoo.com address at http://mail.yahoo.com
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20502&t=20476
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
