Yep reload worked. Should have tried that earlier, but you often assume your
own lack of knowledge, well I do, but suppose I keep learning.......
Thanx to all that responded
""news.groupstudy.com"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Try reload both routers to see what happen.
> If still the same, I guess the cable is defective.
> Once I met this weird situation b4 and solved
> by replacing another cable.
> So you may try to swap cable to see if it works.
>
> Gary
>
> ""Gaz"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Nope that isn't it s0 on 2511 is connected to a 1601 called gazdav to
its
> s0
> > they both have ppp encaps. However 2511 s1 is connected to a 2501 and
they
> > both have encaps hdlc.
> >
> > Weirder still both interfaces show up up ...Hmmm
> >
> >
> > Thanx anyways
> >
> >
> >
> >
> > ""news.groupstudy.com"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Hi there,
> > >
> > > 1) You misconfigured the IP on 2511's S1 interface.
> > > 2) 2511's S1 is missing an "enc ppp" command.
> > >
> > > Regards,
> > > Gary
> > >
> > > ""Gaz"" wrote in message
> > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > Should be a very simple one this don't know what I'm doing wrong.
Why
> > > can't
> > > > I ping my own interface or the remote end. Back to back serial cable
> > > >
> > > > Here is the config of router gazdav attatched via s0 to S1 of router
> > 2511.
> > > >
> > > > gazdav#sh ru
> > > > Building configuration...
> > > >
> > > > Current configuration:
> > > > !
> > > > version 12.0
> > > > service timestamps debug datetime msec
> > > > service timestamps log uptime
> > > > service password-encryption
> > > > !
> > > > hostname gazdav
> > > > !
> > > > enable secret 5 $1$FgI.$bygzIO/R77k37T.qfBWhH.
> > > > !
> > > > username gazdav password 7 xxxxxxxx
> > > > username pinger password 7 xxxxxxx
> > > > username ping privilege 5 password 7 xxxxxxx!
> > > > !
> > > > !
> > > > !
> > > > ip subnet-zero
> > > > no ip finger
> > > > no ip domain-lookup
> > > > !
> > > > isdn switch-type basic-net3
> > > > isdn voice-call-failure 0
> > > > !
> > > > !
> > > > !
> > > > interface Ethernet0
> > > > ip address 10.10.1.1 255.255.255.0
> > > > no ip directed-broadcast
> > > > ip nat inside
> > > > no ip route-cache
> > > > no ip mroute-cache
> > > > !
> > > > interface Serial0
> > > > ip address 172.16.10.6 255.255.255.252
> > > > no ip directed-broadcast
> > > > encapsulation ppp
> > > > !
> > > > interface BRI0
> > > > bandwidth 64
> > > > ip address negotiated
> > > > no ip directed-broadcast
> > > > ip nat outside
> > > > encapsulation ppp
> > > > no ip route-cache
> > > > no ip mroute-cache
> > > > no keepalive
> > > > dialer idle-timeout 150
> > > > dialer string 08089933000
> > > > dialer-group 2
> > > > isdn switch-type basic-net3
> > > > ppp authentication chap callin
> > > > ppp chap hostname gazdav
> > > > ppp chap password 7 xxxxxx
> > > > !
> > > > router ospf 101
> > > > network 10.10.1.0 0.0.0.255 area 0
> > > > network 172.16.10.4 0.0.0.0 area 0
> > > > !
> > > > ip nat inside source list 100 interface BRI0 overload
> > > > ip classless
> > > > no ip http server
> > > > !
> > > > logging 10.10.1.2
> > > > access-list 1 permit 10.10.1.2
> > > > access-list 100 permit ip 10.10.1.0 0.0.0.255 any
> > > > access-list 101 deny udp any any eq snmp
> > > > access-list 101 deny udp any any eq ntp
> > > > access-list 101 permit ip any any
> > > > access-list 110 deny udp 10.10.1.0 0.0.0.255 eq netbios-ns any log
> > > > dialer-list 1 protocol ip list 110
> > > > dialer-list 2 protocol ip permit
> > > > snmp-server engineID local 00000009020000605CBC2B55
> > > > snmp-server community public RW
> > > > !
> > > > line con 0
> > > > exec-timeout 0 0
> > > > transport input none
> > > > line vty 0
> > > > exec-timeout 0 0
> > > > privilege level 5
> > > > password 7 xxxxxxx
> > > > no login
> > > > length 25
> > > > transport input telnet
> > > > line vty 1 4
> > > > exec-timeout 0 0
> > > > privilege level 5
> > > > password 7 xxxxxxx
> > > > no login
> > > > transport input telnet
> > > > !
> > > > end
> > > >
> > > >
> > > > And here is the config of the router at the other end.
> > > >
> > > > 2511#sh ru
> > > > Building configuration...
> > > >
> > > > Current configuration : 968 bytes
> > > > !
> > > > version 12.2
> > > > service timestamps debug uptime
> > > > service timestamps log uptime
> > > > no service password-encryption
> > > > service udp-small-servers
> > > > service tcp-small-servers
> > > > !
> > > > hostname 2511
> > > > !
> > > > enable secret 5 $1$aJT7$r0fZD.akp8IAaWZEYJuxD1
> > > > !
> > > > ip subnet-zero
> > > > no ip domain-lookup
> > > > !
> > > > ip ssh time-out 120
> > > > ip ssh authentication-retries 3
> > > > !
> > > > !
> > > > !
> > > > !
> > > > interface Ethernet0
> > > > ip address 10.10.1.10 255.255.255.0
> > > > no ip route-cache
> > > > no ip mroute-cache
> > > > shutdown
> > > > !
> > > > interface Serial0
> > > > ip address 172.16.10.5 255.255.255.252
> > > > encapsulation ppp
> > > > no ip route-cache
> > > > no ip mroute-cache
> > > > no fair-queue
> > > > clockrate 64000
> > > > !
> > > > interface Serial1
> > > > ip address 172.16.20.5 255.255.255.252
> > > > no ip route-cache
> > > > no ip mroute-cache
> > > > clockrate 64000
> > > > !
> > > > router ospf 100
> > > > log-adjacency-changes
> > > > network 172.16.10.4 0.0.0.0 area 0
> > > > network 172.16.20.4 0.0.0.0 area 0
> > > > !
> > > > ip classless
> > > > no ip http server
> > > > !
> > > > !
> > > > line con 0
> > > > exec-timeout 0 0
> > > > line 1 16
> > > > transport input all
> > > > line aux 0
> > > > transport input all
> > > > line vty 0 4
> > > > no login
> > > > !
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20580&t=20556
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
