Don,
I have installed and configured quite a few WG FB's where I last worked.
Where I work now, we setup a Cisco VPN 3000 concentrator for customers to
connect to us over the Internet. One customer has a Watchguard and was
unable to connect. We obtained a temporary FB II for testing and could not
get it to fully work. We were able to establish a connection, but within a
few seconds, it would drop.
You do not need TCP 50 and 51, what is needed is protocol 50 and 51. I was
not able to find the ability in the WG to allow these, only tcp/udp port
numbers. You do need some tcp/udp port numbers as well as the protocol
numbers.
Last I had heard, WG did not have a resolution to this. It is something
with their firewall.
Dave
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20581&t=20461
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
