The PIX itself has no imbedded rate-limiting functionality, so if you wanted
to limit traffic streams inbound to the PIX you would need to use some other
tool. For example, you could front-end the PIX with a router and use CAR to
limit certain traffic streams outbound from the router to the PIX.
Take a look at CAR in the cisco docs and see if it might meet your needs.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_
c/qcprt1/qcdcar.htm
You can limit traffic based on access-list matching criteria, so you could
limit traffic streams from particular source IP's with AH or ESP as the
protocol.
HTH,
Kent
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Eugene Kushnirskiy
Sent: Thursday, September 20, 2001 8:06 PM
To: [EMAIL PROTECTED]
Subject: IPSec tunnel throughput [7:20640]
Is it possible to limit the bandwidth of an IPSec tunnel on a PIX
firewall?
Eugene
[GroupStudy.com removed an attachment of type application/x-pkcs7-signature
which had a name of smime.p7s]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20686&t=20640
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
