I need help w/ a little config info... RtrA (s0 192.1.1.4)& RtrB (s0 192.1.1.3) connected via serial cable. They can each ping each other. RtrB has a PC (ip address 192.168.1.1)connected to its' e0 int (192.168.1.10) through a hub. How can I ping from RtrA (s0 192.1.1.4)to the PC attached to RtrB(e0 192.168.1.10)? Do I need a static route on RtrB from the s0 interface to the e0 interface? TIA..... Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=20759&t=20759 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]