Ah, cool, thanks! Actually, I just found out the answer myself as well.
Loopback0 is up, line protocol is up
Hardware is Loopback
Internet address is 10.1.11.6/32
MTU 1514 bytes, BW 8000000 Kbit, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Thanks again.
Albert
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, September 24, 2001 9:46 PM
To: [EMAIL PROTECTED]
Subject: Re: Loopback interface [7:20949]
In a message dated 9/24/01 7:15:36 PM Central Daylight Time,
[EMAIL PROTECTED] writes:
<< Subj: Loopback interface [7:20949]
Date: 9/24/01 7:15:36 PM Central Daylight Time
From: [EMAIL PROTECTED] (Albert Y. Pak)
Sender: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED] (Albert Y. Pak)
To: [EMAIL PROTECTED]
8000 MB
Hi all,
What is the default speed of a loopback interface on a Cisco router?
Thanks,
Albert
[GroupStudy.com removed an attachment of type application/ms-tnef which had
a name of winmail.dat]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20952&t=20949
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
