RSM config can be a little different. It depends on what version of
software you are
running. If you are running Version 12.0(14)W5(20). To configure vlans you
need to
type in "interface port-channel1.x" , where x is vlan ID. You might want to
research it
a little more on Cisco's web site.
Hope it helps
Juan Blanco wrote:
> Ray,
> They use the same software and command-line interface CLI as the 500
> series...One of the main difference between these switches and 5000 is the
> high density of Gigabyte Ethernet ports supported.
>
> JB
> -----Original Message-----
> From: Ray Smith
> To: [EMAIL PROTECTED]
> Sent: 9/25/2001 9:21 AM
> Subject: Catalyst 4000 Configuration [7:20996]
>
> Guys,
>
> Is there a difference with configuring the Catalyst 4000 as oppose to a
> Catalyst 5000? Is the operating system the same or even similar?
>
> Ray
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at
> http://explorer.msn.com/intl.asp
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of khramov.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21013&t=20996
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]