Hello,
Does any one have experience configuring Access Server on
2511?
I've got a several devices with serial ports that I need to
access remotely, preferably telnet into them. So I found an
old 2511 with async ports. But I can not get it working.
Here is the config on that 2511:
interface Ethernet0
ip address 192.168.190.25 255.255.255.0
ip helper-address 192.78.4.47
no lat enabled
!
interface Async1
ip unnumbered Ethernet0
ip tcp header-compression passive
async mode interactive
peer default ip address 192.168.190.26
!
interface Async2
ip unnumbered Ethernet0
peer default ip address 192.168.190.27
!
interface Async3
ip unnumbered Ethernet0
peer default ip address 192.168.190.28
!
interface Async4
ip unnumbered Ethernet0
ip tcp header-compression passive
encapsulation ppp
shutdown
async mode interactive
peer default ip address 192.173.50.14
no cdp enable
ppp authentication chap
line 1 16
login local
transport input telnet
stopbits 1
flowcontrol hardware
Would you please tell me what I am missing. I am only going
to be using first three async ports.
Thanks,
Alex
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of khramov.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21056&t=21056
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
