Standby is stanby, it doesn't do any routing until the active router goes
down.
Regards,
Mark,
-----Original Message-----
From: Jim Bond [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 25, 2001 11:52 AM
To: [EMAIL PROTECTED]
Subject: policy route [7:21044]
Hello,
I have 2 routers running HSRP in a small office. I
want SMTP traffic go through standby router so I
configured policy route on active router that all SMTP
traffic, send to standby router. But it doesn't work.
I'm wondering if policy route will work this way?
At active router:
interface e0
ip address 10.1.1.2 255.255.255.0
ip policy route-map SMTP
standby ip 10.1.1.1
...
route-map SMTP permit 10
match ip address 102
set ip next-hop 10.1.1.3 !standby router ethernet
...
access-list 102 permit tcp any any eq 25
Thanks in advance.
Jim
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger.
http://im.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21059&t=21044
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
