not as far as i am aware.... What you COULD do ..is set them up as seperate lines ...and then run eigrp/ospf betweeen them ...this will load balance the lines.. you could just upgrade your one line to 256k...also but there is no serial "etherchannel" varient.. you can do it with isdn using dialer channel`s.... HTH steve >From: "[EMAIL PROTECTED]" > >Reply-To: "[EMAIL PROTECTED]" > >To: [EMAIL PROTECTED] >Subject: Can I configure 2 leased line for single channel ? [7:21105] >Date: Wed, 26 Sep 2001 02:26:48 -0400 > >Hello all >I have 128 KBPS leased line between 2 routers and I want to enhance the >performance of the same using one more leased line . Can anyboby suggest me >whether is there any command which will make these 2 lines to work as 1 >logical line as is the case with etherchannel ? >Thanks in advance. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21147&t=21147 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
