Could he set the encapsulation of each serial int to be ppp, and use ppp multilink on them?? ----- Original Message ----- From: "Stephen Skinner" To: Sent: Thursday, September 27, 2001 12:28 AM Subject: Re: Can I configure 2 leased line for single channel ? [7:21147] > not as far as i am aware.... > > What you COULD do ..is set them up as seperate lines ...and then run > eigrp/ospf betweeen them ...this will load balance the lines.. > > you could just upgrade your one line to 256k...also > > but there is no serial "etherchannel" varient.. > > you can do it with isdn using dialer channel`s.... > > > HTH steve > > >From: "[EMAIL PROTECTED]" > > > >Reply-To: "[EMAIL PROTECTED]" > > > >To: [EMAIL PROTECTED] > >Subject: Can I configure 2 leased line for single channel ? [7:21105] > >Date: Wed, 26 Sep 2001 02:26:48 -0400 > > > >Hello all > >I have 128 KBPS leased line between 2 routers and I want to enhance the > >performance of the same using one more leased line . Can anyboby suggest me > >whether is there any command which will make these 2 lines to work as 1 > >logical line as is the case with etherchannel ? > >Thanks in advance. > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21154&t=21154 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]