On a switch you can configure port level security:
Dave
chris wrote:
>
> Is there any way to config you switch/router to prompt you when a certain
> Mac address is plugged in or online. Rather than setting the cam table
> aging to 3 days.
>
> -----Original Message-----
> From: dragi radovanovic [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 26, 2001 10:45 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Can I configure 2 leased line for single channel ?
> [7:21105]
>
> If you change the encap to ppp, you can build a multilink bundle, and have
a
> pipe going between you routers.
> Do search on configuring virtual template on cisco.com
>
> Dragi
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367
"Emotion should reflect reason not guide it"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21176&t=21170
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
