Good morning All i have a small issue here of which i need your experience am new to pix firewall and am runing ver 5.3 i need to set up an access list to allow TFTP, FTP, only inside. is this correct? ******marked
access-list acl_inside permit tcp 10.0.0.0 255.0.0.0 10.19.22.0 255.255.255.0 eq www access-list acl_inside permit tcp 10.0.0.0 255.0.0.0 10.19.22.0 255.255.255.0 eq 139 access-list acl_inside permit udp 10.0.0.0 255.0.0.0 10.19.22.0 255.255.255.0 eq TFTP*** access-list acl_inside permit tcp 10.0.0.0 255.0.0.0 10.19.22.0 255.255.255.0 eq 69***** access-list acl_inside permit tcp 10.0.0.0 255.0.0.0 10.190.22.0255.255.255.0 eq ftp-data***** access-list acl_inside permit tcp 10.0.0.0 255.0.0.0 10.190.22.0255.255.255.0 eq 20***** also is this statement correct? access-list acl_inside permit udp 10.0.0.0 255.0.0.0 10.19.22.0 255.255.255.0 eq snmp-req Basicaly i need to allow ftp inside and tftp only. Thanks Rod Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21272&t=21272 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
