Group,

I have a problem with a certain vlan on our network.  The problem goes
something like this...

I have a vlan105 interface created on a cat 6509.  The primary ip address is
x.x.105.254.  The interface has secondary addresses of x.x.155.254,
x.x.156.254 and x.x.157.254.

Servers on this network are dropping packets, one in particular,
serverA-x.x.155.219, is dropping packets 50% of the time.

Moved the server to a different switch, same vlan105, the problem continues.

Moved the server to vlan100, it works fine.

Replaced cable and nics. Ensured proper speed and duplex are configured.

No output from a debug vlan or span.

Opened a TAC case a few days ago and the problem still remains. 

I just got a suggestion to remove and rebuild the vlan105 interface on the
router.  That will happen later this afternoon.  Any other suggestions will
be greatly appreciated.

Robert




Robert M. Lopez   
Network Planning
CIT PGRD Ann Arbor
Pfizer Global Research & Development
Phone 734-622-3948      Fax 734-622-1690

"There are only two ways to live your life. One is as though nothing is
a miracle. The other is as though everything is a miracle."  ...Albert
Einstein




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21281&t=21281
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to