Omer, Check the following to start with:
a) make sure your interface s0 or s1 has the proper commands such as bandwidth, clock rate and correct ip address, and no shut Since you have not given the config outputs, it is very hard to visualise what is missing, but try the following Ra# (DCE)---------------------------------------(DTE) Rb# global command username Ra password cisco Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21535&t=21533 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]