Can the firewall ping your router? Can the firewall ping the inside 'host'? Did you create the NAT addresses / pool? Do a show xlate ... what xlates are listed?
Do you have an external route on your FW and is the def gateway of your host(s) set correctly? Thanks! TJ -----Original Message----- From: C.E.O Dickson [mailto:[EMAIL PROTECTED]] Sent: Monday, October 01, 2001 11:35 AM To: [EMAIL PROTECTED] Subject: PIX - VERY URGENT [7:21569] Please Help - Have configure a PIX Firewall with basic NAT. Cant get can connection through the firewall. Have set up the PING command - access-list acl_out permit icmp any any access-group acl_out in interface outside access-group acl_out in interface inside cant ping through even, keep getting this message 302010: 0 in use, 36 most used Can some one help please. Thanks ***************************************************************************** The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. ***************************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21578&t=21569 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]