We had a similar issue when we tried here. There is a command that does bitswopping. I can't remember the command but it is in global config : something like "bridge 1 bitswap....."
HTH Andrew -----Original Message----- From: Erlend Ringstad [mailto:[EMAIL PROTECTED]] Sent: 02 October 2001 12:12 PM To: [EMAIL PROTECTED] Subject: translation/transparent bridging between tokenring and ethernet [7:21651] Greetings What I am trying to achive, transparent bridging/translation bridging between token ring and ethernet. I have one host on the To0/0: 10.10.10.1 netmask 255.255.255.0 and another one on the ethernet segment: 10.10.10.2 netmask 255.255.255.0 The config below does not work, and ideas? no ip routing ! interface Ethernet0/0 no ip address bridge-group 1 ! interface TokenRing0/0 no ip address ring-speed 16 bridge-group 1 ! bridge 1 protocol ieee --erlend Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21655&t=21655 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]