Yo that has been happening to me for about six years, thanks for the fix Mike.
----- Original Message ----- From: "Michael Snyder" To: Sent: Tuesday, October 02, 2001 2:01 PM Subject: Re: CCIE Written: autocommand [7:21721] > autocommand option no-hangup > > Will fix your problem. Not all ios's have this option. > > > ""Lists Wizard"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Dear Professionals, > > > > I have tried to configure my router with autocommand as shown below. When > I > > telnet to the router it prompt me for a password, when I enter the > password > > the telnet connection will disconnect immediately. Have I done any > mistake? > > What is the purpose of this command? > > > > Thanks > > > > > > r1-2516(config)#line vty 0 4 > > r1-2516(config-line)#autocommand show running-config > > r1-2516(config-line)# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21737&t=21721 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
