You can configure IRB on an MSFC, but VLAN interfaces are basically BVI's. You will not be able to configure a BVI interface. You configure your bridge group on each vlan interface and bridge the traffic you don't want to route. I have a customer that is routing IP on 6 vlans, while bridging DecNet until they can get rid of it.
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com ----- Original Message ----- From: "Geoffrey Cauchi" To: Sent: Tuesday, October 02, 2001 11:56 AM Subject: IRB or RBE on Catalyst 6500 [7:21686] > Hi > > Is it possible to configure Integrated Routing and Bridging or Routed Bridge > Encapsulation on a Cisco Catalyst 6500 with a MSFC2? > > Regards and Thanks in advance > > Geoffrey Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21775&t=21686 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]