I am wondering if anyone has been able to use CiscoSecure ACS for controling access to router console and vty lines. I am currently running ACS 2.5 and am using it for authentication of dialup and vpn remote access users. I have been trying to figure out how to use it to control access to my routers but seem to get to a point where authentication fails and the message in the failed attemps log is "unknown NAS"
Is it necessary to define every device in cisco secure for this to work? I know I must be missing something simple, I can get it to work fine when I configure it for terminal access on one of my remote access routers (which are defined as NAS in cisco secure) but nothing else. Any ideas, links, examples, abuse....whatever you feel is appropriate :-) Thanks, Dennis Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21958&t=21958 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]