We have 2 DS3's. On we want to us as the primary and one only in the event of failover. Here is the config -
router bgp 14292 no synchronization IP's here!!! neighbor 144.232.54.37 remote-as 1239 neighbor 144.232.54.37 version 4 neighbor 144.232.54.37 route-map lowerpref out neighbor 144.232.54.37 filter-list 1 out neighbor 157.130.229.113 remote-as 701 neighbor 157.130.229.113 version 4 neighbor 157.130.229.113 route-map higherpref in neighbor 157.130.229.113 filter-list 1 out no auto-summary route-map higherpref permit 10 set weight 5000 ! route-map lowerpref permit 10 set as-path prepend When we use just ONE of the 2 connections by themselves everything works fine. But when we turn them both up, we can only get to some sites and not others. Has anyone seen this before. Had TAC check it out, they feel the config is good. Thanks in advance Chris Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22146&t=22146 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]