Please send me the config for the FR switch and both routers -----Original Message----- From: Ash Aslam [mailto:[EMAIL PROTECTED]] Sent: 18 October 2001 04:57 To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Frame Relay Basics - Inverse-arp problem
Hi there, I am trying to set-up the following Frame Relay config's on my routers: http://www.cisco.com/warp/public/125/14.html#14-A I am having a problem in not being able to see anything when I issue the following command: Spicey#show frame-relay map In the above URL the output is listed as: Spicey#show frame-relay map Serial0 (up): ip 3.1.3.2 dlci 140(0x8C,0x20C0), dynamic, broadcast,, status defined, active The serial 0 on my "Spicey" Router just keeps going up, down, up down, etc. etc every 10 secs or so. The serial cable is connected and checked ok via show controllers serial 0 as DTE. The DCE clocking is not configured, nor is there a Frame Relay Switch in the URL config's. I can't quite understand how the "dynamic" mapping is taking place in the URL and why I am not seeing Inverse-arp working? Any responses appreciated. Thanks & Regards, Ash Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23325&t=23325 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]