I'll show you how the router behaves when deleting the subinterface: C7206A(config)#inter hssi6/0.50 poi C7206A(config-subif)#no inter hssi6/0.50 poi % Not all config may be removed and may reappear after reactivating the sub-inte rface C7206A(config)#
This is where the reload is needed. Dave McHugh Randy wrote: > > Apparently after some experimentation, if you save your config after you > creat the dlci's > before: > ! > interface Serial0.1 multipoint > ip address 2.1.1.1 255.0.0.0 > no ip route-cache > frame-relay interface-dlci 101 > frame-relay interface-dlci 102 > > and the save your config after you remove your dlci's then they are gove > from the config file > > after: > interface Serial0.1 multipoint > ip address 2.1.1.1 255.0.0.0 > no ip route-cache > > But this is only one scenario, like a multipoint subint with associated with > 2 dlci's /pvc and I did not try to delete the sub interface so I am not sure > how the router will behave if I try other senarios > Randy -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23543&t=23476 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
